View SIP20C-05S2V5J_4376355.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SIP20C Series
DC-DC CONVERTERS
* * * * * * * * * * Updated version of SIP20 Best-of-class wide output trim range Industry standard footprint High power density (60 W/in3) High Efficiency 90% Fixed frequency (500 kHz) Remote ON/OFF Undervoltage lockout (UVLO) Remote sense option Available RoHS compliant
Single output
9-20 W Non-isolated DC-DC Regulators 1
The SIP20C series are non-isolated dc-dc converters packaged in a single-in-line footprint (2.5 x 0.55 x 0.23 inches) giving designers a cost effective solution for conversion of 5 Vdc to 3.3 Vdc and lower voltages. The SIP20C offers a best-of-class wide output trim range which allows maximum design flexibility and a pathway for future upgrades. Local voltage conversion by the SIP20C from existing 5 V system voltages eliminates the need for redesign of existing power architectures when voltage requirements change. The SIP20C is designed for applications that include distributed power, workstations, computers and file servers. Implementing state of the art surface mount technology and automated manufacturing techniques, the SIP20C offers compact size and efficiencies of 90%. The SIP20C is an updated version of the original SIP20 and is fully compatible with the original model.
All specifications are typical at nominal input, full load at 25 C unless otherwise stated
(4)
2 YEAR WARRANTY
SPECIFICATIONS
OUTPUT SPECIFICATIONS Voltage adjustability S3V3J S2V5J S1V5J (See Note 1) Vin = 4.5-5.5 V Io = 0-6 A 60% to 115% 60% to 110% 87% to 130% 2.7% 0.3% 0.3% 0A None 0 to 20 MHz BW 100 mV pk-pk, 30 mV rms max. 0.01%/C 2.0% max. deviation 300 s recovery to within 1.0% (See Note 6) 0.5 Vdc compensation
EMC CHARACTERISTICS Radiated emissions Electrostatic discharge
EN55022/11, FCC part 15 EN61000-4-2, IEC801-2
Level A
GENERAL SPECIFICATIONS Efficiency Isolation voltage Switching frequency Approvals and standards (See Note 7) Material flammability Dimensions Pin length Weight MTBF MIL-HDBK-217F (LxWxH) Fixed See table Non-isolated 500 kHz typ. VDE0805, EN60950, IEC950 UL1950, CSA C22.2 No. 950 UL94V-0 63.5 x 13.97 x 5.84 mm 2.5 x 0.55 x 0.23 inches
Set point accuracy Line regulation Load regulation Minimum load Overshoot/undershoot Ripple and noise (See Note 8) Temperature coefficient Transient response (See Note 2) Remote sense INPUT SPECIFICATIONS Input voltage range Input current Input current Input reflected ripple Remote ON/OFF Start-up time External capacitor
0.135 0.02 inches (3.43 0.5 mm) 5 g (0.18 oz) >1,000,000 hours
ENVIRONMENTAL SPECIFICATIONS Thermal performance 4.5 to 5.5 VDC No load @ Io max. and Vin = 0-5.5 V (See Note 3) 150 mA 5.3 A max. Altitude 200 mA (See Note 5) 1.0 ms (See Note 4) 100 F Vibration Operating ambient, See curve convection cooled Operating ambient, -25 C to +85 C 300 LFM forced air See Curve Non-operating -55 C to +100 C Operating Non-operating 5-500 Hz 10,000 feet max. 40,000 feet max. 2.4G rms (approx.)
International Safety Standard Approvals
VDE0805/EN60950/IEC950 File No. 126328 UL1950 File No. E174104 CSA 22.2 No. 950 and CB Report and Certificate to DE1-31667
File Name: sip20c.pdf Rev (01): 16 Dec 2005
SIP20C Series
DC-DC CONVERTERS
OUTPUT POWER (MAX.) 20 W 15 W 9W Notes
1
Single output
9-20 W Non-isolated DC-DC Regulators 2
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
INPUT VOLTAGE 4.5-5.5 Vdc 4.5-5.5 Vdc 4.5-5.5 Vdc OUTPUT VOLTAGE 3.3 V 2.5 V 1.5 V OUTPUT CURRENT (MIN.) 0A 0A 0A OUTPUT CURRENT (MAX.) 6A 6A 6A EFFICIENCY (TYP.) 90% 82% 75% PROTECTION Short-circuit Input surge Undervoltage Thermal Continuous (See Note 9) 6 Vdc continuous max. UVLO Vin <3.8 V Automatic recovery, unit will shut down if RT1 exceeds 85 C (See diagram below) REGULATION LINE 0.3% 0.3% 0.3% LOAD 0.3% 0.3% 0.3% MODEL NUMBER (6, 10, 11) SIP20C-05S3V3J SIP20C-05S2V5J SIP20C-05S1V5J
Vin = 5.0 V, Io = full load, TA = 25 C. Total error band 4.5% over all operating conditions and temperatures until end of life. 2 di/dt = 1 A/1 s, Vin = 5 Vdc, Tc = 25 C, load change = 0.5 lo max. to lo max. and Io max. to 0.5 Io max. 3 With simulated source impedance of 500 nH. 5 Hz to 20 MHz. 4 Use a 100 F with ESR = 0.045 max. at 100 kHz @ 25 C. 5 Referenced to ground for shutdown. If pin 6 is high unit will shut down. If pin 6 is open unit will operate as normal. 6 Single line sense; 0.5 Vdc compensation. Designate with the suffix 'R' e.g. SIP20C-05S3V3RJ. 7 This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 8 0 MHz to 20 MHz BW, 0.1 F ceramic, 1 F tantalum on output. 9 A short from +Vout to ground of less than 100 m may cause the unit to enter a non-destructive latch-up mode. If latch-up does occur the power supply to the unit may need to be cycled. 10 The `J' suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 11 NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative.
EXTERNAL OUTPUT TRIMMING Output can be externally trimmed by using either method shown below.
J1 PIN 5 J1 PIN 5
TRIM UP
J2 PIN 5 J2 PIN 5
10K TRIMPOT
TRIM DOWN
J1 PIN 2 J1 PIN 2
DERATING CURVE
6 5 Output Current (A) 4 3 2 1 300 LFM
J1 PIN CONNECTIONS
200 LFM 100 LFM
PIN NUMBER 1 2 3 4 5
FUNCTION +Vout +Vout Opt. Remote Sense (+) +Vout Ground
NATURAL CONVECTION COOLING
0
-25C 0C 15C 25C 35C 45C 55C 65C 75C 85C
AMBIENT TEMPERATURE (C)
J2 PIN CONNECTIONS PIN NUMBER FUNCTION Ground +Vin +Vin No Pin Trim Remote ON/OFF
2.50 (63.5) 0.55 (13.97)
0.23 Max. (5.84) PC Board 0.135 (3.43)
1 2 3 4 5 6
0.685 (17.40)
RT1 1 2 34 5 123456
0.025 (0.635) Square Pins
J1 0.140 Max. (3.556)
J2
0.10 (2.54) Optional Remote Sense Pin (See Note 6) 0.28 (7.11) 1.90 (48.26)
ALL DIMENSIONS IN INCHES (mm)
Recommended hole size 0.04 (1.0) Plated through hole
Datasheet (c) Artesyn Technologies(R) 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.
www.artesyn.com
File Name: sip20c.pdf Rev (01): 16 Dec

▲Up To Search▲

Price & Availability of SIP20C-05S2V5J

	To Download SIP20C-05S2V5J Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .